Arizona Metals (TSXV:AMC) Intersects 39.0 m at 4.2 g/t AuEq (incl. 7.2 m at 6.0 g/t AuEq and 9.8m at 6.1 g/t AuEq) and 7.9 m at 4.0% CuEq at the Kay Mine in Arizona

Exploration targets map. Source: Arizona Metals Corp.

Arizona Metals (TSXV:AMC) has announced results from seen recently completed drill holes at the Kay Mine Project in Arizona. Arizona Metals has completed 70,000 metres of drilling at the Kay Mine, and is fully funded for the completion of the 19,000 metres planned in the Phase 2 program. This includes the priority focus areas and the Phase 3 program of 76,000 more metres of drilling.

Marc Pais, CEO, commented in a press release: “Drilling at the Kay Mine Project continues to intersect very large widths and high grades of massive sulphide mineralization. The holes released today demonstrate excellent continuity of mineralization in all directions, while also showing that mineralization is substantially thicker than suggested by our original modelling. Drilling has extended mineralization well into both the hanging-wall and foot-wall envelopes, which gives the potential to define a significant tonnage of mineralization. The large widths and high grades being encountered at Kay are extremely rare in the context of VMS deposits either in production or being explored globally.

We have drilled approximately 70,000 meters at Kay to date, with each hole solidifying our opinion that this is one of the very few large precious-metals rich VMS deposits not yet mined, and more importantly, is potentially part of a much larger mineralized system that has yet to be explored.

Road construction is well underway to reach drill locations that will test the Central Target, located 300 m west of the Kay Mine Deposit. Drilling at pads C1 and C2 is expected to commence in November 2022, and will comprise part of the planned 76,000 metre Phase 3 program. Permitting is also in progress for pads W1 and W2 to test the Western Target, also part of the Phase 3 program.

The Company is fast approaching an inflection point in our drilling strategy. Over the last two years we have focused on expanding the Kay Mine Deposit, which covers only 320 m of strike. This represents only 3% of the 11,000 m of prospectively mineralized geological contact horizon defined by extensive surface mapping, soil geochemistry, airborne and ground electromagnetic surveys, and gravity surveys. Completion of the Central Target drill road and pads, with drilling anticipated to commence in November, will mark a shift in focus from expanding Kay, to also aggressively drill-testing our claims to the west to discover new VMS deposits. The Phase 3 program will entail 76,000 m of drilling at an anticipated cost of $27 million. Work will continue at the Kay Mine Deposit to define a resource, in conjunction with associated hydrological, rock geochemistry, metallurgical, and specific gravity studies, but we anticipate that over the next 18 months approximately 90% of our budget will go towards exploration south, north, and west of the Kay Mine Deposit.”

Kay Mine long section. Source: Arizona Metals Corp.
Kay Mine zone section. Source: Arizona Metals Corp.

Kay Mine Phase 3 Drill Program Update – Moving to Central and Western Targets

The Phase 3 drill program will test the numerous parallel targets heading west of Kay, as well as the possible northern and southern extensions of the Kay Deposit. The road toward the Central Target (located 300 m west of the Kay Deposit) is underway, with drilling at the Central Target pads expected to commence during November 2022.

A total of six holes were drilled to the west from pad 7 (see Figure 3), but due to the westerly dip of the stratigraphy and the Central Target EM anomaly, these holes did not fully test the Central Target. Results from these six holes, along with updated structural mapping and ground-loop EM geophysics, will be used to refine the drill targeting from pads C1 and C2. The location of these pads will provide much better angles to intersect the core of the Central Target, while also testing for its extensions north and south on strike of the mafic-felsic contact that potentially hosts mineralization.

Permitting is in progress for drill pads at the Western Target (W1 and W2, located ~1,000 m west of the Kay Deposit), with road construction anticipated to commence in Q4’22 and drilling in Q1’23.

The common shares of the Company have been listed on the TSX Venture Exchange (the “TSXV”) since August 7, 2019 under the symbol “AMC”. The Company has received approval to graduate its listing to the Toronto Stock Exchange (the “TSX”), and the Company’s common shares will begin trading on the TSX on October 13, 2022, and will be delisted from the TSXV upon commencement of trading on the TSX. The Company’s trading symbol (AMC) and CUSIP will remain the same and no action is required by shareholders.

 

Table 1. Results of Phase 2 Drill Program at Kay Mine, Yavapai County, Arizona announced in this news release.

        Analyzed Grade Analyzed Metal Equivalent Metal Equivalent
Hole ID From m To m Length m Cu % Au g/t Zn % Ag g/t Pb % Cu eq % Au eq g/t Zn eq% Cu eq % Au eq g/t Zn eq%
KM-22-74 649.2 688.2 39.0 0.40 1.77 3.39 30.5 0.32 3.09 5.07 8.05 2.56 4.20 6.67
including 652.6 659.8 7.2 0.68 2.57 5.13 18.0 0.11 4.39 7.19 11.42 3.67 6.02 9.55
including 678.5 688.2 9.8 0.15 3.08 5.67 32.0 0.51 4.57 7.50 11.90 3.74 6.13 9.73
KM-22-74 716.3 719.6 3.4 0.03 0.84 2.65 37.5 0.57 1.99 3.26 5.17 1.65 2.71 4.30
KM-22-75 690.7 692.8 2.1 0.23 0.25 0.84 9.3 0.22 0.83 1.36 2.15 0.71 1.17 1.86
KM-22-75 705.0 716.9 11.9 0.67 0.17 0.30 8.0 0.05 0.97 1.58 2.51 0.86 1.41 2.24
KM-22-75 723.1 731.7 8.5 0.31 0.50 1.27 11.6 0.09 1.21 1.99 3.16 1.03 1.69 2.69
KM-22-75 753.5 754.5 1.1 0.23 1.22 1.85 12.0 0.04 1.78 2.92 4.64 1.46 2.39 3.80
KM-22-79 667.8 673.8 5.9 0.11 0.52 1.03 6.9 0.23 0.93 1.52 2.42 0.77 1.27 2.02
KM-22-79 681.8 689.8 7.9 2.12 1.38 3.14 47.2 0.27 4.61 7.55 11.98 4.00 6.55 10.40
KM-22-81 813.8 822.4 8.5 0.10 0.22 0.69 15.5 0.11 0.65 1.07 1.69 0.54 0.89 1.42
KM-22-81A 847.7 852.8 5.2 0.03 0.19 2.04 46.2 0.48 1.40 2.29 3.64 1.19 1.94 3.09
KM-22-82 226.5 228.0 1.5 0.14 0.07 1.58 5.4 0.53 0.95 1.55 2.46 0.85 1.40 2.22

The true width of mineralization is estimated to be 50% to 99% of reported core width, with an average of 76%. (2) Assumptions used in USD for the copper and gold Metal Equivalent calculations were metal prices of $4.63/lb Copper, $1937/oz Gold, $25/oz Silver, $1.78/lb Zinc, and $1.02/lb Pb. Assumed metal recoveries (rec.), based on a preliminary review of historic data by SRK and ProcessIQ1, were 93% for copper, 92% for zinc, 90% for lead, 72% silver, and 70% for gold. The following equation was used to calculate copper equivalence: CuEq = Copper (%) (93% rec.) + (Gold (g/t) x 0.61)(72% rec.) + (Silver (g/t) x 0.0079)(72% rec.) + (Zinc (%) x 0.3844)(93% rec.) +(Lead (%) x 0.2203)(93% rec.). The following equation was used to calculate gold equivalence: AuEq = Gold (g/t)(72% rec.) + (Copper (%) x 1.638)(93% rec.) + (Silver (g/t) x 0.01291)(72% rec.) + (Zinc (%) x 0.6299)(93% rec.) +(Lead (%) x 0.3609)(93% rec.). Analyzed Metal Equivalent calculations are reported for illustrative purposes only. The metal chosen for reporting on an equivalent basis is the one that contributes the most dollar value after accounting for assumed recoveries.

Table 2. Full results of Phase 2 Drill Program at Kay Mine, Yavapai County, Arizona.

        Analyzed Grade Analyzed Metal Equivalent Metal Equivalent
Hole ID From m To m Length m Cu % Au g/t Zn % Ag g/t Pb % Cu eq % Au eq g/t Zn eq% Cu eq % Au eq g/t Zn eq%
KM-21-17 504.4 505.4 0.9 1.19 4.73 0.05 9.0 0.00 4.17 6.83 10.84 3.20 5.24 8.31
KM-21-18 404.3 429.8 25.5 0.35 0.86 1.71 15.8 0.23 1.71 2.80 4.44 1.43 2.35 3.72
including 408.6 410.6 2.0 0.50 2.22 7.25 64.4 0.82 5.33 8.74 13.87 4.51 7.39 11.72
including 424.9 427.3 2.4 1.60 2.59 3.16 18.0 0.52 4.66 7.64 12.12 3.92 6.43 10.21
KM-21-18A 391.4 423.8 32.5 1.09 0.62 1.25 17.7 0.15 2.13 3.48 5.53 1.85 3.04 4.82
including 393.3 395.8 2.4 9.57 2.83 2.72 40.9 0.28 12.73 20.87 33.12 11.36 18.63 29.56
KM-21-19 377.8 378.3 0.5 3.39 5.59 6.83 128.0 0.63 10.58 17.34 27.52 8.81 14.44 22.92
KM-21-20 442.7 443.6 0.9 2.56 0.52 3.52 18.5 0.14 4.40 7.22 11.45 3.98 6.52 10.34
KM-21-20 456.0 458.1 2.1 1.49 0.35 0.14 6.0 0.04 1.81 2.97 4.71 1.63 2.66 4.23
KM-21-21 452.6 495.5 42.8 0.80 0.78 1.52 15.1 0.15 2.01 3.29 5.22 1.73 2.83 4.49
including 488.7 493.5 4.8 0.26 2.50 6.13 27.6 0.54 4.48 7.34 11.65 3.74 6.13 9.73
KM-21-21A 422.0 431.4 9.4 1.17 0.57 2.25 8.6 0.36 2.53 4.15 6.58 2.25 3.68 5.85
KM-21-21A 439.1 502.1 63.0 0.45 1.28 3.14 58.8 0.77 3.08 5.04 8.00 2.57 4.21 6.67
including 465.0 481.9 16.9 0.52 2.45 4.05 80.9 0.99 4.43 7.26 11.53 3.62 5.94 9.42
KM-21-22 679.4 682.8 3.4 0.79 0.95 0.06 12.0 0.01 1.49 2.44 3.87 1.23 2.01 3.20
KM-21-23 394.4 401.4 7.0 0.36 0.93 1.94 13.5 1.17 2.05 3.35 5.32 1.73 2.84 4.51
KM-21-23 438.6 459.2 20.6 0.17 1.18 1.93 27.8 0.37 1.94 3.17 5.03 1.58 2.59 4.11
KM-21-24 501.2 592.1 90.8 0.45 1.33 3.42 44.6 0.41 3.02 4.95 7.86 2.53 4.15 6.59
including 501.2 521.7 20.4 1.34 1.70 6.35 113.1 0.66 5.86 9.60 15.24 4.99 8.18 12.99
including 520.9 521.7 0.8 1.75 16.50 9.55 574.0 1.22 20.31 33.29 52.82 15.57 25.52 40.50
including 575.9 592.1 16.2 0.16 2.50 6.00 44.4 0.79 4.51 7.40 11.74 3.75 6.14 9.74
including 588.7 590.4 1.7 0.47 9.98 23.70 18.2 0.13 15.84 25.96 41.20 13.21 21.65 34.36
KM-21-25 662.6 741.3 78.6 1.41 2.33 2.79 43.4 0.35 4.33 7.10 11.26 3.61 5.92 9.40
including 663.2 672.7 9.4 8.06 1.84 1.31 92.3 0.15 10.45 17.13 27.18 9.30 15.24 24.19
including 693.0 703.9 11.0 0.68 6.28 10.40 99.7 1.17 9.56 15.66 24.86 7.79 12.77 20.27
KM-21-25A 654.7 719.9 65.2 1.04 1.94 2.15 18.9 0.18 3.25 5.32 8.44 2.71 4.43 7.04
including 655.5 662.8 7.3 3.66 2.09 1.85 30.2 0.21 5.93 9.73 15.44 5.17 8.47 13.44
including 710.8 716.9 6.1 2.72 7.95 3.73 37.4 0.31 9.37 15.36 24.38 7.52 12.33 19.56
KM-21-25B 647.2 648.9 1.7 0.13 0.58 2.41 62.1 0.64 2.04 3.35 5.31 1.70 2.79 4.42
KM-21-25B 655.6 659.9 4.3 0.93 0.91 0.91 25.3 0.19 2.07 3.40 5.40 1.75 2.88 4.56
KM-21-25B 666.0 667.8 1.8 0.60 0.72 2.98 33.5 0.43 2.55 4.18 6.63 2.20 3.61 5.72
KM-21-25B 673.3 674.7 1.4 0.08 2.10 2.39 23.0 0.33 2.53 4.15 6.58 2.01 3.29 5.23
KM-21-25B 681.2 682.6 1.4 0.09 1.54 2.98 11.0 0.35 2.34 3.83 6.08 1.93 3.16 5.01
KM-21-26 506.7 582.8 76.0 0.79 1.61 4.23 32.7 0.54 3.78 6.19 9.83 3.21 5.27 8.36
including 511.1 526.1 14.9 0.73 1.78 9.68 43.3 0.77 6.05 9.92 15.74 5.26 8.63 13.69
including 573.8 582.8 9.0 4.02 6.06 3.32 18.2 0.19 9.18 15.04 23.87 7.64 12.52 19.87
KM-21-27 706.8 738.2 31.4 1.58 0.16 0.69 9.0 0.06 2.03 3.33 5.28 1.85 3.03 4.80
KM-21-27 764.4 777.4 13.0 2.85 0.48 0.17 8.5 0.02 3.29 5.39 8.55 2.97 4.87 7.73
KM-21-27A 666.3 769.4 103.1 0.79 1.06 1.90 35.8 0.42 2.54 4.17 6.62 2.15 3.52 5.59
including 666.3 687.0 20.7 3.21 1.39 1.26 19.4 0.20 4.74 7.77 12.33 4.18 6.84 10.86
including 706.4 724.6 18.3 0.69 2.69 4.70 92.2 1.21 5.13 8.41 13.35 4.22 6.91 10.97
including 752.9 763.8 11.0 0.07 1.07 4.68 95.3 0.98 3.49 5.73 9.09 2.92 4.78 7.59
KM-21-27B 665.8 762.9 97.1 1.31 1.62 3.21 31.7 0.40 3.88 6.35 10.08 3.31 5.42 8.61
including 702.0 723.0 21.0 0.87 4.56 9.03 81.5 1.10 8.01 13.13 20.83 6.63 10.87 17.25
including 723.0 738.2 15.2 4.97 0.36 0.42 18.7 0.05 5.51 9.03 14.33 5.04 8.26 13.11
KM-21-28 640.7 694.9 54.3 1.87 2.85 5.03 29.4 0.70 5.93 9.72 15.43 5.04 8.26 13.12
including 660.2 671.6 11.4 0.54 4.29 9.30 32.2 1.17 7.24 11.87 18.84 6.04 9.89 15.70
including 681.1 689.0 7.9 4.39 9.47 10.34 93.1 2.41 15.42 25.27 40.10 12.80 20.98 33.29
including 690.4 692.6 2.2 16.06 0.82 0.06 55.8 0.01 17.02 27.90 44.28 15.62 25.61 40.64
KM-21-29 393.0 393.8 0.8 0.43 1.54 4.92 9.0 0.21 3.38 5.54 8.79 2.89 4.74 7.53
KM-21-30 264.9 267.9 3.0 1.18 0.02 0.01 1.5 0.00 1.21 1.98 3.15 1.12 1.83 2.91
KM-21-32 316.4 320.0 3.7 1.84 1.29 2.47 38.5 0.30 3.95 6.47 10.27 3.41 5.60 8.88
KM-21-32 342.9 345.9 3.0 0.67 0.52 2.70 13.0 0.15 2.16 3.54 5.62 1.90 3.12 4.95
KM-21-32 358.9 368.4 9.4 0.60 1.47 1.99 45.7 0.35 2.70 4.42 7.01 2.22 3.63 5.76
KM-21-33 171.3 172.5 1.2 3.79 0.45 0.21 63.0 0.17 4.69 7.68 12.19 4.19 6.86 10.89
KM-21-34 299.3 303.9 4.6 0.29 1.69 0.94 46.3 0.26 2.12 3.47 5.50 1.65 2.70 4.29
KM-21-34 309.7 310.9 1.2 2.27 0.56 1.55 19.9 0.08 3.38 5.54 8.80 3.03 4.96 7.87
KM-21-35 609.6 615.1 5.5 0.92 1.26 1.71 57.7 0.02 2.80 4.60 7.29 2.33 3.82 6.06
including 609.6 613.0 3.4 1.39 1.69 1.98 54.0 0.01 3.61 5.92 9.40 3.03 4.96 7.87
KM-21-38 406.5 407.8 1.4 0.60 1.08 9.41 4.0 0.25 4.96 8.13 12.90 4.42 7.24 11.49
KM-21-38 467.4 476.1 8.7 0.09 1.73 3.87 61.1 1.22 3.38 5.55 8.80 2.78 4.56 7.23
including 470.0 475.2 5.2 0.12 2.44 5.68 87.5 1.79 4.88 8.01 12.71 4.02 6.59 10.46
KM-21-40 589.8 613.8 24.0 4.98 0.61 0.98 23.4 0.45 6.01 9.86 15.65 5.46 8.95 14.21
including 589.8 597.9 8.1 7.63 0.43 0.39 27.1 0.17 8.30 13.60 21.58 7.61 12.47 19.78
KM-21-40 627.9 680.8 52.9 0.47 2.91 3.40 35.7 0.40 3.93 6.44 10.22 3.17 5.20 8.25
including 641.1 648.3 7.2 1.15 7.66 8.27 88.5 0.92 9.90 16.23 25.76 7.95 13.03 20.68
including 670.3 674.1 3.8 1.53 10.89 9.47 24.6 0.61 12.15 19.91 31.59 9.69 15.88 25.19
KM-21-41 462.6 559.3 96.7 1.04 1.54 2.66 40.8 0.35 3.41 5.59 8.86 2.87 4.71 7.47
including 503.2 514.2 11.0 0.99 5.34 8.17 106.3 1.63 8.59 14.08 22.35 7.02 11.51 18.26
including 546.7 558.1 11.4 5.86 5.83 3.24 185.4 0.04 12.14 19.90 31.58 10.15 16.64 26.40
including 553.1 556.9 3.8 7.11 9.55 5.70 505.8 0.09 19.16 31.41 49.84 15.62 25.59 40.62
KM-21-42 803.5 810.3 6.9 0.05 1.60 1.58 64.3 0.35 2.22 3.64 5.78 1.73 2.83 4.49
KM-21-42 835.5 839.7 4.3 0.63 2.46 2.15 21.7 0.21 3.18 5.20 8.26 2.56 4.20 6.67
KM-21-42 853.7 854.7 0.9 0.11 1.63 2.88 28.0 0.40 2.52 4.13 6.55 2.05 3.37 5.34
KM-21-42A 786.7 787.6 0.9 0.03 3.61 2.18 17.0 0.70 3.36 5.51 8.74 2.58 4.22 6.70
KM-21-42A 805.4 811.1 5.6 6.17 0.92 0.18 39.5 0.01 7.12 11.68 18.53 6.43 10.54 16.72
including 807.0 808.9 2.0 10.72 0.87 0.11 61.8 0.00 11.79 19.32 30.66 10.74 17.60 27.93
KM-21-42A 840.9 877.2 36.3 0.55 0.62 1.35 10.7 0.13 1.56 2.56 4.06 1.34 2.20 3.49
KM-21-42B 808.0 811.2 3.2 0.29 2.06 5.77 63.0 0.94 4.47 7.33 11.63 3.74 6.13 9.72
KM-21-42B 816.9 819.9 3.0 2.31 0.66 1.23 16.0 0.15 3.35 5.49 8.71 2.99 4.90 7.77
KM-21-42B 835.5 840.8 5.3 0.02 0.73 2.93 13.5 0.24 1.75 2.87 4.56 1.49 2.45 3.88
KM-21-42C 849.2 877.4 28.2 3.81 0.47 0.29 12.5 0.09 4.32 7.08 11.24 3.93 6.44 10.23
including 849.2 854.7 5.5 14.57 0.66 0.16 37.5 0.03 15.34 25.14 39.89 14.11 23.12 36.70
including 863.8 869.4 5.6 2.29 1.17 0.59 13.1 0.25 3.39 5.55 8.81 2.96 4.85 7.70
including 874.8 877.4 2.6 2.83 0.26 0.03 7.2 0.01 3.06 5.02 7.96 2.80 4.59 7.28
KM-21-42C 886.1 889.1 3.0 0.87 0.88 0.50 5.2 0.05 1.65 2.71 4.30 1.40 2.30 3.65
KM-21-43 583.7 607.1 23.4 0.39 0.25 3.68 3.1 0.02 1.98 3.25 5.15 1.79 2.93 4.65
including 598.9 599.8 0.9 0.50 0.18 11.30 3.0 0.03 4.99 8.17 12.97 4.56 7.48 11.87
KM-21-43 616.0 633.1 17.1 1.81 0.17 0.14 8.2 0.03 2.04 3.34 5.31 1.86 3.05 4.84
including 631.2 633.1 1.8 6.30 0.61 0.09 25.0 0.01 6.91 11.32 17.97 6.30 10.32 16.38
KM-21-44 353.4 377.3 23.9 0.34 0.97 2.52 18.3 0.33 2.12 3.47 5.50 1.79 2.93 4.65
including 354.0 356.6 2.6 0.23 2.14 7.97 38.9 0.68 5.06 8.29 13.15 4.30 7.05 11.19
KM-21-45 459.6 463.0 3.4 0.32 0.62 6.63 82.3 0.87 4.10 6.71 10.65 3.55 5.82 9.24
including 461.2 462.1 0.9 0.15 1.23 16.90 182.0 2.50 9.39 15.38 24.41 8.17 13.39 21.26
KM-21-46 350.4 362.9 12.4 0.66 2.61 3.69 40.6 0.39 4.08 6.69 10.61 3.34 5.48 8.70
including 350.4 353.3 2.8 0.77 5.19 6.83 107.0 0.72 7.58 12.42 19.70 6.11 10.01 15.88
KM-21-47 433.9 435.9 2.0 0.16 1.88 9.28 138.7 2.17 6.46 10.58 16.79 5.46 8.95 14.20
KM-21-48 605.2 610.7 5.5 3.54 0.45 0.19 12.7 0.05 4.00 6.55 10.40 3.63 5.95 9.45
KM-21-48 630.3 634.6 4.3 1.11 0.34 0.69 12.7 0.11 1.71 2.80 4.45 1.52 2.49 3.95
KM-21-48 685.5 696.8 11.3 0.98 0.05 0.06 4.2 0.02 1.07 1.75 2.77 0.98 1.60 2.54
KM-21-48 715.1 718.4 3.4 2.08 0.04 0.03 4.3 0.01 2.15 3.52 5.59 1.98 3.25 5.16
KM-21-48 723.0 724.5 1.5 1.54 0.07 0.06 4.0 0.02 1.64 2.68 4.26 1.51 2.47 3.92
KM-21-48 735.5 743.6 8.1 0.34 0.60 1.52 9.2 0.07 1.38 2.26 3.59 1.18 1.93 3.06
KM-21-48A 538.0 539.5 1.5 0.31 1.17 2.79 29.0 0.52 2.44 4.01 6.36 2.05 3.35 5.32
KM-21-48A 687.9 696.9 9.0 1.64 0.36 0.79 7.9 0.01 2.23 3.66 5.80 2.01 3.29 5.22
including 687.9 688.8 0.9 0.15 1.53 5.35 5.0 0.01 3.18 5.21 8.27 2.71 4.45 7.06
including 694.9 696.0 1.1 8.36 0.80 0.10 40.0 0.03 9.21 15.10 23.96 8.39 13.75 21.81

The true width of mineralization is estimated to be 50% to 99% of reported core width, with an average of 76%. (2) Assumptions used in USD for the copper and gold Metal Equivalent calculations were metal prices of $4.63/lb Copper, $1937/oz Gold, $25/oz Silver, $1.78/lb Zinc, and $1.02/lb Pb. Assumed metal recoveries (rec.), based on a preliminary review of historic data by SRK and ProcessIQ2, were 93% for copper, 92% for zinc, 90% for lead, 72% silver, and 70% for gold. The following equation was used to calculate copper equivalence: CuEq = Copper (%) (93% rec.) + (Gold (g/t) x 0.61)(72% rec.) + (Silver (g/t) x 0.0079)(72% rec.) + (Zinc (%) x 0.3844)(93% rec.) +(Lead (%) x 0.2203)(93% rec.). The following equation was used to calculate gold equivalence: AuEq = Gold (g/t)(72% rec.) + (Copper (%) x 1.638)(93% rec.) + (Silver (g/t) x 0.01291)(72% rec.) + (Zinc (%) x 0.6299)(93% rec.) +(Lead (%) x 0.3609)(93% rec.). Analyzed Metal Equivalent calculations are reported for illustrative purposes only. The metal chosen for reporting on an equivalent basis is the one that contributes the most dollar value after accounting for assumed recoveries.

Long section. Source: Arizona Metals Corp.

 

The above references an opinion and is for information purposes only. It is not intended to be investment advice. Seek a licensed professional for investment advice. The author is not an insider or shareholder of any of the companies mentioned above.

 

By Matthew Evanoff

I cover the mining industry and the best mining stocks around the world. I write about industry news, individual companies, projects, management, and profiles on industry leaders.

If you would like to receive our free newsletter via email, simply enter your email address below & click subscribe.

MOST ACTIVE MINING STOCKS

 Daily Gainers

 Australian Mines Ltd. AUZ.AX +900.00%
 Adex Mining Inc. ADE.V +50.00%
 Casa Minerals Inc. CASA.V +30.00%
 Rare Element Resources Ltd. REE +26.63%
 Astro Resources NL ARO.AX +25.00%
 Tearlach Resources Ltd. TEA.V +21.05%
 MacDonald Mines Exploration BMK.V +16.67%
 GME Resources Ltd. GME.AX +16.67%
 Standard Lithium SLL.V +16.42%
 Black Iron, Inc. BKI.TO +16.28%

Download the latest Solaris Resources (SLSSF) Investor Kit

You have successfully subscribed to the newsletter

There was an error while trying to send your request. Please try again.

MiningFeeds will use the information you provide on this form to be in touch with you and to provide updates and marketing.